Ask Experts Questions for FREE Help !
Ask
    rusty50's Avatar
    rusty50 Posts: 13, Reputation: 1
    New Member
     
    #1

    Oct 23, 2012, 08:51 PM
    How can I tell if the diaphragm is out on a diaphragm well tank
    I have a diaphragm well tank that keeps kicking on and off pretty fast when using the water in the house. I have check the pressure when pump is off and the pressure is 38psi and the gauge reads 40psi and 18psi when pump turns on at 20psi. This has me worried because it just started about a month ago but seams worse now. For example, toilet is flushed and the pump kicks on and off ten times before the toilet tank is filled.
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
     
    #2

    Oct 24, 2012, 03:05 AM
    The short-cycling you are experiencing is the ultimate sign. You can also press the air valve at the top for a few seconds. If water comes out, then you have your answer. You can also use a hammer to lightly "ping" up the side of the tank. You can hear a change in the sound of the pinging when you reach the top of the water in the tank. Should be about halfway up. Yours will likely be nearer the top.

    You can do a temporary fix. Turn off the system and drain pressure down to zero by opening a faucet. Use an air compressor to put ten or fifteen pounds of pressure in the tank. That will hold for several weeks, long enough for you to replace the tank.
    rusty50's Avatar
    rusty50 Posts: 13, Reputation: 1
    New Member
     
    #3

    Oct 24, 2012, 07:16 AM
    Quote Originally Posted by jlisenbe View Post
    The short-cycling you are experiencing is the ultimate sign. You can also press the air valve at the top for a few seconds. If water comes out, then you have your answer. You can also use a hammer to lightly "ping" up the side of the tank. You can hear a change in the sound of the pinging when you reach the top of the water in the tank. Should be about halfway up. Yours will likely be nearer the top.

    You can do a temporary fix. Turn off the system and drain pressure down to zero by opening a faucet. Use an air compressor to put ten or fifteen pounds of pressure in the tank. That will hold for several weeks, long enough for you to replace the tank.
    I thank you for these tips and had a quick squirt of cold water in my face this morning checking the air valve tip out. (haha) Well now I can replace the tank with a little bigger one. Again thanks.
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
     
    #4

    Oct 24, 2012, 05:56 PM
    Wise decision. Best wishes.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to calculat for Diaphragm tank V for a booster pump station include a Jocky pump? [ 0 Answers ]

How to calculate the Diaphragm tank "V" for a booster pump station include a 4 duty pumps and Jockey pump "Q 1p" each pump = 40 L/s. "Qj" Jockey Pump = 10.5 L/s. Can calcaulate based on each Q ? ("Q1p" , "Q4p" or "Qj")

Well water diaphragm tank? [ 1 Answers ]

Which is better? A pressurized water tank for a well that has a bladder or one that has a diaphragm,and what is the difference?

How to Speak Through Diaphragm [ 1 Answers ]

How to make a practice for speaking from diaphragm

Diaphragm tank pressure adjustment [ 6 Answers ]

How to I adjust the pressure in my home water well diaphragm tank?

Diaphragm Well Tank pressure [ 2 Answers ]

I recently purchased a farm with a well. I would like to verify and adjust the pressure on the Challenger (Flexon Industries) 33.4 gallon, model PC122R diaphragm well tank. It has a yellow sticker on top that says 38psi. Under that someone wrote with a sharpie LRPS 3-19-04. There is a...


View more questions Search