Ask Experts Questions for FREE Help !
Ask
    BigEZ's Avatar
    BigEZ Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 4, 2011, 08:31 AM
    Having well water problems
    Our pressure switch went out. We replaced our switch but we still have no water. Our well pump is working but we are still not getting any water to come into the pressure tank. What should we look for?
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
     
    #2

    Oct 4, 2011, 09:36 AM
    Is your well above ground? If so, have you checked to make sure it still has prime?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Water Heater problems, no water flow after pressure valve change [ 4 Answers ]

I changed my pressure release valve, now I can not hot water flw in my house.

Water Well problems [ 2 Answers ]

I have a problem in my house with water pressure the farther you get from the well. Also, my hot water works in the side of the house closest to the hot water heater and very little at the fartherest point. I have a water well and the pump seems to be running all the time. The tank is 3 or 4...

Well Water Problems [ 12 Answers ]

Yesterday I did not have any water pressure, I checked pressure tank it was empty. I filled pressure tank to correct air pressure. Well pump is a 50-30 It is cutting on at 30 psi but then cutting off at 40 psi, one min. later cutting back on and cutting off at 50-55 psi.When no water faucets are...

Hot Water Cold Water problems [ 2 Answers ]

HELP! In our upstairs bathroom, we have a sink, and a stand up shower. This afternoon, only the hot water would run from the sink faucet, but nothing would come out in the shower. We wondered if the pipes were frozen because of the cold weather. This evening, we tried the tap and showers...

Water problems [ 4 Answers ]

I recently replaced the check valve and pressure switch on my pump and all is working fine except for my kitchen's water pressure is low but the pressure is good in both of my bathrooms. Any suggestions on what to do to fix this problem.


View more questions Search