Ask Experts Questions for FREE Help !
Ask
    ladylori's Avatar
    ladylori Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 15, 2010, 11:41 AM
    I have a well and my pipes froze now I have no water?
    I thawed it with a heat gun and it worked for about 5 minutes then stopped again. I am getting no pressure at all from the gauge. The stroage area with the pump is warm, as are the pipes. When I turn the valve on from the pump itself I get trickling water..
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Dec 15, 2010, 03:15 PM

    Is this pump above ground? If so, are you sure it is primed?

    "I thawed it with a heat gun and it worked for about 5 minutes..." Are you saying your pump was frozen and you thawed it with a heat gun?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Water pipes knocking on upper floor, after pipes burst [ 7 Answers ]

Hi - recently, my water pipes froze and burst, flooding my basement. I've had the pipes repaired. Now, when I turn on the hot water in my upstairs (2nd floor) sink, there's a knocking/clunking after I turn the hot water off. Its only the hot water (doesn't do it with cold water). When I...

Water froze up then after unfroze hot water stop working [ 2 Answers ]

Back in winter time water frozed up and after pipes thawed out we discovered that a pipe was busted.we fixed the pipe and the hot water in bathroom stop working. Hot water works fine in kitchen but the hot water in bathroom sink in shower doesn't even comes on.

View more questions Search