Ask Experts Questions for FREE Help !
Ask
    ladladlad's Avatar
    ladladlad Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 17, 2009, 10:24 PM
    Get a new dishwasher pump,
    Get a new dishwasher pump, a weak one.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Sep 18, 2009, 04:47 AM
    Is there a question here? If so let's have it. Regards, Tom
    cyberheater's Avatar
    cyberheater Posts: 321, Reputation: 12
    Full Member
     
    #3

    Sep 18, 2009, 08:08 AM

    Was that advice? (grin) Hope not.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GE dishwasher won't pump [ 1 Answers ]

My GE nautilus dishwasher hums when started but it won't pump any water in. It leaked water the cycle before it stopped pumping water.

GE dishwasher will not pump - Repair or Buy new one [ 2 Answers ]

Hi-our dishwasher has 3-4 inches of clean water after every cycle. We took out every screen or hose possible thinking that it might be clogged. Nothing helped; so we're guessing it's pump that's not working. Should I get the pump replaced or buy a new dishwasher? Which would be less expensive?

Dishwasher will not pump [ 5 Answers ]

I have a GE dishwasher that will not pump and the only ID is 165D5450P004. I need to know if it is simply clogged or the motor is gone. When I run it through all cycles I can hear the timer click but no other sound. The tub is currently full of water. Thanks for your help.

Kenmore dishwasher motor won't pump water out [ 5 Answers ]

Model Number: 587.1550590 Age: More than 10 years -------------------------------------------------------------------------------- I have an older Kenmore dishwasher circa 1992. At the start of the wash cycle, the pump should start to pump out any left over water from before. But now I...

Ge dishwasher - water pump failure? [ 2 Answers ]

@ 2000 GE potscrubber It will fill with water, and drain, but it hums like an electrical motor is stuck, and no water pressure is making it to the rotator bar. Is there a pressure pump that may have failed? It appears to do everything, but spray water. Any ideas welcome. TIA Alex


View more questions Search