Ask Experts Questions for FREE Help !
Ask
    jccooper's Avatar
    jccooper Posts: 3, Reputation: 1
    New Member
     
    #1

    Oct 12, 2007, 12:28 PM
    Gas line pressure test
    I hate to be redundant on my first question here but I'm in a bit of a delimma. I have installed a black iron propane gas system in the house I am building by myself. (Retired and needed something to do and place to live) My propane supplier guy loaned me a gauge that you screw onto the end of the pipe and put compressed air into the system.

    First, I have only one outlet (to the water heater) capped off. The rest (3 more) have the ball valves installed with just some teflon tape (everything else is LP rated pipe dope)

    So, my propane guy says "just put that gauge on there, pump it up to about 15 or 20 pounds and leave for a couple of days. Okay. I left it overnight and it was a zero. I checked all the inside (the pipe runs under the house --- pier & beam and has 5 joints/couplings) and found a couple of really slow leaks which I tightened up and it seems I have fixed those.

    I guess you are getting the picture here. I'm well past retirement age and don't crawl under houses too well so I'm trying to avoid that if at all possible, hoping to find a leak inside instead. So, I guess I have a couple of questions.

    First, is it possible the ball valves could leak, they're brand new and appear to be somewhat heavy duty --- like maybe commercial even.

    Second, if the line holds pressure for 15 minutes, but then is at zero an hour or more later, isn't that a problem that needs attention?

    And I guess last but not least, does anybody have any idea why damned old fools get it in their head that they are going to do something all by themselves and then won't hire a professional when the going gets rough?

    I appreciate you folks taking the time.

    Tks

    JC
    theghosthunters's Avatar
    theghosthunters Posts: 4, Reputation: 1
    New Member
     
    #2

    Oct 12, 2007, 12:51 PM
    Quote Originally Posted by jccooper
    I hate to be redundant on my first question here but I'm in a bit of a delimma. I have installed a black iron propane gas system in the house I am building by myself. (Retired and needed something to do and place to live) My propane supplier guy loaned me a gauge that you screw onto the end of the pipe and put compressed air into the system.

    First, I have only one outlet (to the water heater) capped off. The rest (3 more) have the ball valves installed with just some teflon tape (everything else is LP rated pipe dope)

    So, my propane guy says "just put that gauge on there, pump it up to about 15 or 20 pounds and leave for a couple of days. Okay. I left it overnight and it was a zero. I checked all the inside (the pipe runs under the house --- pier & beam and has 5 joints/couplings) and found a couple of really slow leaks which I tightened up and it seems I have fixed those.

    I guess you are getting the picture here. I'm well past retirement age and don't crawl under houses too well so I'm trying to avoid that if at all possible, hoping to find a leak inside instead. So, I guess I have a couple of questions.

    First, is it possible the ball valves could leak, they're brand new and appear to be somewhat heavy duty --- like maybe commercial even.

    Second, if the line holds pressure for 15 minutes, but then is at zero an hour or more later, isn't that a problem that needs attention?

    And I guess last but not least, does anybody have any idea why damned old fools get it in their head that they are going to do something all by themselves and then won't hire a professional when the going gets rough?

    I appreciate you folks taking the time.

    Tks

    JC
    The reason it doesn't work properly is because you might have the wrong gauge of didn't screw it on tight enough and if there is a switch to say how much or how little throw that baby into full blast try all of these ideas maybe one is right get back to me as soon as possible. p.s did you check to see if maybe something might have punctured your line?[IMG]128 x 128 - 18k - pnghttp://[/IMG]
    jccooper's Avatar
    jccooper Posts: 3, Reputation: 1
    New Member
     
    #3

    Oct 12, 2007, 02:53 PM
    It's the gauge my propane guy uses all the time and it is tight. I checked it for leaks and there are none. I don't think anything I have around here could puncture iron pipe. And there is no switch.

    I've resigned myself to having to crawl under the house and check those joints.

    Thanks

    JC
    iamgrowler's Avatar
    iamgrowler Posts: 1,421, Reputation: 110
    Ultra Member
     
    #4

    Oct 12, 2007, 03:06 PM
    Quote Originally Posted by jccooper
    It's the gauge my propane guy uses all the time and it is tight. I checked it for leaks and there are none. I don't think anything I have around here could puncture iron pipe. And there is no switch.

    I've resigned myself to having to crawl under the house and check those joints.

    Thanks

    JC
    When you're checking for leaks, are you using a mixture of liquid dish detergent and water in a spray bottle?
    jccooper's Avatar
    jccooper Posts: 3, Reputation: 1
    New Member
     
    #5

    Oct 13, 2007, 06:24 AM
    No, I'm putting it on with a small throw away paint brush.

    JC

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to pressure-test gas pipe [ 15 Answers ]

Hi again! First, MANY thanks to you experts for the help I've gotten in the last month. I passed my plumbing inspection for my new bathroom and kitchen! Now, on to one more little one. I'm installing gas lines. The house was previously on oil heat and all other appliances were electric,...

Propane/Gas Line pressure test [ 3 Answers ]

Hello, Just found this forum, thanks all for creating! I have constructed an outdoor BBQ/Kitchen and I located a 100lb propane tank approx. 50 pipe feet from the point of use. I ran 1/2" black pipe with approx. 15 fittings. I pressure tested as per a plumbers advice with 15lbs of air for 15...

Pressure testing gas line [ 3 Answers ]

I am installing a new LP gas line into my basement. I have the line run and have a pressure tester connected to the line. I am getting conflicting info on the pressure and time I need to test to. I found an old thread (Aug 2005) on this forum that said 10 psi for 15 minutes. I also found a City...

Gas Valve pressure test [ 5 Answers ]

I just ordered a new gas valve for my fireplace. I damaged my old one by blowing compressed air into it to remove spiders that had found their way in through the gas orifice to the burner. Question: how do I test the water column pressure on the new valve, or do I assume it already comes pre-set...

Air pressure check (gas line) [ 2 Answers ]

How can I check the air pressure on a gas line to my house?


View more questions Search