Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ground wire to Gas Meter/Line?
[ 3 Answers ]
I live in Pasadena, California. We are installing a 200 amp Electrical Panel between a friend and I, he has more knowledge of electrical wiring than I do but he told me that we were going to install two copper grounding rods six feet apart near the box and run a line to the water main and another...
Line noise vs ground
[ 17 Answers ]
Hi, I'm new and took long time reading questions and answers but I didn't found answer to my question. I have noise in any outlet in my house and I suspect this is coming from a faulty earth ground since everything seem OK in all outlet and main breaker box. Exemple: If I connect an amplifier...
Underfloor heating 15 amp GFCI to 30 amp breaker
[ 3 Answers ]
I have installed a 240v flextherm heating cable under a floor hoping to use existing 240v. Heating circuit to power it. There are 2 other baseboards on this circuit GFCI thermostat for floor is rated for 15 amp and heating circuit is on 30 amp breaker. I am not getting any power through the GFCI...
Installation of gas line below ground
[ 3 Answers ]
Hello, I live in New Mexico and I am wanting to add a natural gas fire pit to my back yard. How deep to I need to bury a gas line? Can I use galvanized pipe? Do I need to wrap the pipe with anything?
Underfloor heating thermostat
[ 1 Answers ]
I am trying to wire up my underfloor heating but I'm not sure weather the wire with the power is the load or feed, if any one could let me no that would be great. Thanks. Darren View more questions Search
|