Ask Experts Questions for FREE Help !
Ask
    Sueh's Avatar
    Sueh Posts: 3, Reputation: 1
    New Member
     
    #1

    Jul 30, 2006, 12:40 PM
    Garbage Disposal question
    I can't seem to figure out what the problem is. When I flip the switch there is a humming noise so I know that it is getting power but it won't turn. I used the hex wrench & I also used a short handle stick and it spins both ways so there doesn't seem to be blocked but it won't work when I flip the switch. Any ideas?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Jul 30, 2006, 02:58 PM
    Quote Originally Posted by Sueh
    I can't seem to figure out what the problem is. When I flip the switch there is a humming noise so I know that it is getting power but it won't turn. I used the hex wrench & I also used a short handle stick and it spins both ways so there doesn't seem to be blocked but it won't work when I flip the switch. Any ideas?
    Hey sue,
    Yes. If the table turns freely the that would indicate a short in the motor windings and the unit needs to be replaced. The easiest way will be to buy a unit the same as the one being replaced. That way you can keep the old drain and locking assembly in place and not have the hassle of installing a new one. All you'll have to do is snap the new disposal in place and plug it in.
    Good luck, Tom
    Sueh's Avatar
    Sueh Posts: 3, Reputation: 1
    New Member
     
    #3

    Jul 30, 2006, 04:11 PM
    Thanks for your help!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Garbage disposal [ 3 Answers ]

What is the best way to clean the garbage disposal? Sometimes I put in a lemon but it really doesn't seem to work well enough. Any products for eating away the gunk?

Disposal won't drain [ 2 Answers ]

Any suggestions when the disposal won't drain and you've already tried to plunge it?(didn't work) It's a dual sink and the non-disposal side drains properly, so I'm not sure the drain trap is the problem. If I dismantle the drain trap and discover it is not the problem, what next? Thanks in...

Disposal question [ 10 Answers ]

I had a plumber install my garbage disposal because he was doing other work anyway. Sometimes when we put put in the disposal, the food shoots through the pipe and into the other sink creating a huge mess. I uploaded a picture of how he installed it. Looking at other disposals, it seems that the...

Garbage disposal [ 5 Answers ]

I had a garbage disposal installed in my kitchen by a plumber. Sometime when we put garbage in and turn it on it shoots out the other drain and comes up into the other sink basin. My guess is that too much garbage is being put inthere at one time and shoots it across. Also, the instructions say to...

What a garbage [ 4 Answers ]

Hello I bought a piece of sh** system from Lighting Universe online store and my w hole transformer burned down along with part of my ceiling. Does anyone have any recommendations for what system to get?


View more questions Search