Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Water in toilet tank too high--not a ball float
[ 4 Answers ]
Our toilet has been working fine until last evening when it started to sound different when flushed. Clearly the water level is too high in the tank. We have the non-ball type mechanism and I see online where it says to adjust the clip but I don't know how to do that. After some flushes the...
I have incoming water psi at 88---no pressure reducing valve, do have expansion tank
[ 10 Answers ]
Hot water tank failed at 5 years---on a 12 year warranty. Had new tank installed----
Float switch for holding tank
[ 11 Answers ]
I'm considering pumping into a holding tank for a residential well. I need a float switch to cut on/off. Who knows of a good one? I'm not wildly familiar with them. It will need to cut on/off a 1/2 HP submerged pump, 240 volt. I'm looking at a 60 gallon tank with hopes of having a twenty gallon or...
Water tank float valve won't shut off water supply
[ 21 Answers ]
It's me with another plumbing question. It's at a house that I am part owner of but which is 5 hours from my house. I am not there, but I know the approximate setup. So there's this 800 gallon wooden water tank that stores water for a small house. The water is pumped from a cistern (supplied by...
Water tank float switch
[ 1 Answers ]
We live in an area that can loose power in the winter for several days. We are installing a water storage tank on a high point on our property. The tank is about 1,800 feet from the pump controls. After reading some of the discussions it sound like controlling the pump via a float switch is the... View more questions Search
|