| 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Flapper
 [ 1 Answers ]
 I don't have a question. Just a coment thanking you for the information of cutting off the O ring to fix my flapper problem. I had been holding the handle for 2 years until it flushed and finally decided to search out an answer. It works perfect and I am amazed that a 15 second cutting off the O... 
Flapper valve
 [ 1 Answers ]
 My flapperr valve closes too quickly and toilet does not flush properly 
Toilet flapper won't stay down.  It flushes, flapper seats then bobs back up in a sec
 [ 11 Answers ]
 I have shortened the chain, lengthened the chain etc. It finally flushes O.K. & the bowl clears if I hold the handle down for a little bit, the flapper seats then bobs back up and has to be manually pushed down, then it stays. It is a new flapper 
Toilet Flapper
 [ 11 Answers ]
 First, thank you to everyone for all the helpful advice I have received in this forum. Seriously, it's GREAT! I've been lurking for quite some time but have finally found the need to post with a question. About 2 weeks ago my wife and I noticed the toilet in our basement was "running"... 
Toilet Flapper
 [ 12 Answers ]
 The toilet flapper closer too soon (as soon as you release the lever). It is a new flapper; any suggestions? View more questions Search 
 |