Hello, I have leaking in my bath/shower faucet. It is a Danco kit. I believe the original was Bradley-Cole. After removing the stem, my old one had a hole on the end rubber piece. So I was pretty confident replacing it would fix it. After replacing it a pretty hard stream went to completely...

I have a 3 stem Delta shower faucet. The hot water side wouldn't completely close. I removed the old stem, spring and seat. I purchased a replacement. Is there a trick to having the spring and seat stay in place before inserting the new cartridge?

Replaced a american standard 11K-3H/C faucet stem and barrel. It is leaking. The valve opens (twist the handle to the left) but when twisting the handle to close and turn off water the handle will continually turn left does not stop.. any ideas?

What words are more discriptive than, "What is the life of a shower faucet stem?"? A qualified service person replaced the hot water shower valve stem in May of this year. This a.m. I was unable to turn the water off. When I used a towel for a better grip, I was finally successful. Now, I am...

I have recently replaced my faucet valve stems and the shower devirter stem in the bath tub, and now the only thing that water is flowing through is the shower head and not the spot going in the tub. Also the shower devirter only makes a 1/4 turn.