Ask Experts Questions for FREE Help !
Ask
    Lja2004's Avatar
    Lja2004 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 14, 2015, 02:17 PM
    I need to find the zone valve but carnt, have looked everywhere, might it be under th
    I have a potterton kingfisher mf heating system and want to change it as it's very exspensive to run, I've been told to locate the zone valve but just can not find it, been in the loft, airing cupboard and all around the boiler, might it be under the floor? And will the definitely be one?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Jan 14, 2015, 03:47 PM
    How many thermostats do you have? They regulate the zone valve through the control board. With only 1 t'stat, doubt you have a zone valve.

    Google "potterton kingfisher mf heating system". You may find additional info.
    We have no idea if you have one or where it might be. That is not a US system so it further complicates issues.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Taco zone valve 571-2. Water flow not like the arrow in the valve's body. [ 0 Answers ]

I had a Taco zone valve 571-2 installed recently. Later I noticed that the valve is installed with the arrow in body of the valve pointing to the opposite direction of the actual water flow. I called the plumber and he said that this is not a problem and no damage will occur to the valve, the...

Can you find anything about this artist? I have looked everywhere. [ 0 Answers ]

Here is what an auction is showing. Could they have the wrong artist?

WiI am trying to find the wiring diagram for a zone valve unit of a gas hot water hea [ 1 Answers ]

The copper pipes are hot, the motor is running, but there isn't heat coming upstairs. I believe the wires to the zone valves are either disconnected or misconnected. It is and MAerican Standard unit that is at least 40 years old. Thank you so much!

Where to find the model number on my Honeywell Synchron zone valve [ 5 Answers ]

Where to find the model number on my Honeywell Synchron zone valve. I think the Powerhead and/or motor has gone bad. I had no heat in my master BR this morning and after verifying the Thermastat was kicking in I went down and tried to check the valves. This is just 1 zone out of 5 (3 other...

I have a weil-mclain boiler. The zone valve opens but no heat in zone. What do I do? [ 1 Answers ]

Have replaced the zone valve actuator, but it doesn't seem to be fixing the problem. What else can I do?


View more questions Search