Ask Experts Questions for FREE Help !
Ask
    hgwf's Avatar
    hgwf Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 21, 2008, 04:49 PM
    Dripping Delta Single-handle kitchen faucet
    I have a single-handle Delta kitchen faucet that will not stop dripping. I did some research online and learned to buy a replacement kit to replace the interior workings of the faucet. I have done that, and have replaced every interior part, both O-rings, the springs and seals (which I am told is commonly the problem of dripping), also the black seal on top of the ball, as well as the white plastic shield on top of everything. The only interior part that is not brand new is the ball itself, however, it looks and seems to in fine condition.

    After replacing everything and successfully putting the faucet back together it still continues to drip!

    Any thoughts on what to do next to fix this dripping problem? Any help would be greatly appreciated.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Jul 21, 2008, 06:57 PM
    The ball has a scratch in it. Replace it also.
    hgwf's Avatar
    hgwf Posts: 2, Reputation: 1
    New Member
     
    #3

    Jul 21, 2008, 07:45 PM
    If the ball had a scratch in it wouldn't that scratch be visible?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to remove single valve handle - Delta Shower [ 48 Answers ]

I've got the Seats & Springs to fix a leaky Delta Monitor 1400 Series faucet (and the water is turned off), and am stuck at the very beginning. The handle is a single lever, it appears that the Set Screw is missing. I've tried twisting the lever and pulling without success - not knowing which is...

Dripping Delta tub faucet [ 3 Answers ]

I have a dripping tub spout that I would like to fix. It is a Delta Monitor, single handle style. I figure I have to pull and replace the valve stem, but have no idea how. The stem looks like it is tightly integrated with the plastic sleeve that surround it. Also, am I correct on the part to...

Price Pfister Single-handle kitchen faucet [ 2 Answers ]

I have the faucet and DO NOT use the sprayer. The installer just tied it beneath the sink and I put a hand soap dispenser in the sprayer hole. There is NO WATER PRESSURE. It just dribbles infuriatingly. I found that the little logo button comes off the main chute of the faucet but I don't know...

Delta two handle faucet [ 1 Answers ]

I have a Delta two handle knob faucet in my bathroom. It had a very irritating leak so I purchased knew knobs and replacement parts at Lowe's. I replaced everything down the seats and springs... (except I think what's called the stem) At first, when I turned the water supply back on, the water...


View more questions Search