I'm trying to replace my kitchen sink faucet. The sink and pipes were very old so I had to cut the pipes. I don't know the right terminology but I went to Home Depot, and the man there fixed me up with one half inch compression fittings for my 1/2 inch copper pipe. So far so good. I did the...

I replaced a 7" deep kitchen sink with a 9" sink. Since the sinks are deeper the garbage disposal will not fit around the drain pipe. Is there a flexible pipe that can be used to correct this problem?

I just moved into an apartment and bought a new washer and dryer. They do have hookups in the laundry room, however, the standard pipe in the wall is only 3/4 of an inch in diameter. The washer drain hose is 1 1/4 inches. So there is 1/2 inch space when you put the drain hose over the standard...

Putting in a new sink in bathroom and the J tube isn't quite long enough. Also, the wall pipe fits the J tube, but the drain is too small of a diameter. Are there some adaptive parts that can be used, and if I need a different size /length J tube, how would I measure for it? Yes, I am a girl, but...

The pvc nipple on the intake of my shallow well pump was leaking. I cut the 1 1/4 inch pipe and was going to couple in a new nipple. The coupling would not fit the old pipe. It is white 1 1/4 " and so is my replacement pipe. I showed it to three different hardware stores and none of them could...