Ask Experts Questions for FREE Help !
Ask
    Janie1227's Avatar
    Janie1227 Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 18, 2013, 08:15 AM
    Drain hose for washer
    My drain hose from wager came out of the drain and wet my floors. Is there anything I can get too make it fit tighter in the drain hole. I have take over it now.
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #2

    Apr 18, 2013, 10:27 AM
    You can get a rubber pipe reducer that will clamp onto the stand pipe and the washer hose. You will need the sizes of both pipes. The outside diameter. It is available at most big box stores.

    Chuck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dishwasher drain hose into drain opening for washer. [ 2 Answers ]

I am remodeling my house and want to use space where use to be under countr washer and dryer to instal dishwasher. Can I directly place drain hose from dishwasher into a opening where was inserted drain hose from washer. Do I need air gap?

Must play with drain hose to get washer to drain and spin [ 1 Answers ]

Hi, I have a GE WCSE6270 Washer. After the washer fills and agitates, it starts to make a gurgling, clicking noise and will not finish the cycle (i.e. drain and spin). I noticed that the drain hose in the back was a little leaky, and in trying to play with it, it made the washer drain and spin...

Washer drain hose [ 1 Answers ]

My drain hose was cracked bad after twenty years and I replaced it with one I purchased at Home Depot. The original one was longer, but I bought this one anyway. The original was drapped over the hanger and then through the opening in the back cover and then hooked into the drain (which is...


View more questions Search