What is normal height to mount supply lines and drain line for washing machine?
Add your answer here.
Check out some similar questions!
Washing Machine Standpipe Height [ 1 Answers ]
I am installing a washing machine in the basement and the sewage drain pipe is at a height of 5 feet off the floor. From everything I have read, the standpipe should be above the height of the washer tub and it should be 2" in diameter. Could I install the washer without having a external pump...
What is the standpipe height for under counter washing machine [ 1 Answers ]
Is there a correct height to keep from over flowing the washer drain pipe on an under counter installation. I am having problems with it periodically overflowing onto the floor! It is in a basement location if that makes a difference!
Is there a building code that mandates the height of a washing machine hot/cold feed? [ 5 Answers ]
I am looking to add a countertop over my washer and dryer - however the current hot/cold water feed and drain for the washing machine would be directly in the way of the counter (~41 inches). Is there a code that mandates the height of those lines or can I drop them down 12 inches or so to get...
Vent for Washing Machine Drain Attached to Existing Drain Line [ 0 Answers ]
"Current setup for a washing machine has the discharge hose "hooked" into a laundry tub. Tennants would like something more "permanent." The laundry tub has a normal trap followed by a horizontal run of about 2 feet (2" threaded pipe) then "T's" into a vertical drain/vent. The vent line goes...
Washing Machine Drain- How high can machine lift H2O [ 1 Answers ]
Hi... Thinking about moving the washer down in the basement but the main sewer drain leaving the house is about 2' off the floor. There is currently a sewer lift installed for downstairs toilet that complicated cutting into the existing drain for new Y. Without getting to detailed, there is an...
View more questions Search