Ask Experts Questions for FREE Help !
Ask
    rubydd's Avatar
    rubydd Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 19, 2010, 10:46 AM
    Do you need a gasket when you replace trip level
    Do you need a gasket when you replace trip level
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #2

    Jul 19, 2010, 02:45 PM

    Hello Rubydd,

    This is 5 1/2 year old post you should have start a new one, to answer your question yes you do need a gasket, see the attachment it shows it as a washer, Thanksnk.

    John
    Attached Images
     
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #3

    Jul 20, 2010, 06:36 AM

    Toi add a bit to Johns answer the gasket is there to prevent water from leaking past the faceplate.
    Cheers, Tom
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #4

    Jul 20, 2010, 06:53 AM

    Just to add my 2 cents: Yes, Absolutely... Gasket is a must...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I replace a skimmer gasket on a gunite pool [ 2 Answers ]

How do I replace the gasket on a skimmer in a gunite pool.

Cost to replace head gasket on Chevy Blazer 2002 [ 1 Answers ]

I have a 2002 Chevy Blazer which needs an Intake Gasket replaced I am asking what I should expect to pay at a local professional garage/

Replace detergent trip spring [ 0 Answers ]

Have hotpoint hda3400f00bb; detergent round dispensor will not stay closed. I ordered spring. Could you give me simple instructions on how to replace spring. I assume I take out screws to get to back of dispensor Thanks

How to replace iron cleanout in floor with flush PVC one I won't trip on? [ 2 Answers ]

Hi experts. There's an iron cleanout (4") in the floor of my favorite person's space that needs to go away. I'm thinking I can chip it out, cut it with a grinder, chip away at the concrete around it, put in a rubber connector, and install a new, flush-to-floor plastic cleanout. Is this the...

Steps to Replace Valve Cover Gasket on 93 F350 7.3L [ 2 Answers ]

My son just picked up a 93 Ford F350 7.3 IDFI w/a leak on the passenger side valve cover gasket. The replacement process looks pretty involved and the dealer wants $270 for that side. Does anyone have any suggestions on what needs to be completely removed vs moved and the steps you would take to...

View more questions Search