Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Moen Faucet
[ 3 Answers ]
Hi Tom I found the site and registered but I still need my son to reduce the size of the pictures so I can attach them. He took the photo-editing software off my computer. I'll get back to you shortly. Thanks. Mark Ingham
Moen Faucet problems
[ 3 Answers ]
The Moen faucet in my shower comes away from the wall when the shower is turned to hot and water is diverted through the shower head. How do I fix this problem?
Soldering a Moen shower valve
[ 4 Answers ]
I'm new to this forum and have a question concerning the best way to solder a Moen model 62320 shower valve. Do I need to remove the cartridge? I was afraid it would get too hot and melt the o-rings. How do you know how long to heat the joint before you apply solder. It seems some of my joints are...
Diverter valve problem
[ 1 Answers ]
Hi All, Had a problem with the diverter valve knurled end being worn, so I changed the whole valve(Danco replacement for Sayco). With the new valve, I have low pressure & also when putting water towards the shower head, it still comes out the lower spicket. How does that happen. Thanks in...
Peerless Diverter Valve
[ 3 Answers ]
Is there anyplace on the web that would have an internal drawing of a Peerless single-lever faucer? My diverter valve is sticking, and before I take it apart, I'd like to know what to expect inside. Thanks Jim View more questions Search
|