Ask Experts Questions for FREE Help !
Ask
    uluru341's Avatar
    uluru341 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 19, 2009, 08:18 AM
    Diverter Problem
    Quote Originally Posted by hkstroud View Post
    Remove the handle, remove the bonnet nut, remove the diverter stem, replace washer.
    Is that valid for a built in shower valve like the one attached too (it's not an identical match to the exact model I have but is very close - both are Ideal Standard)? What should I be looking for if I manage to remove the metal face plate please? What sits behind?

    Thanks
    Attached Images
     
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Aug 20, 2009, 06:26 AM

    You should not piggy back on someone else's post. Start your own thread.

    Pull out diverter, if there are flats surfaces on the diverter (hidden by the pull knob when in the closed position) unscrew the diverter from the valve.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Diverter Problem [ 1 Answers ]

Thanks Mark! This worked out great. Jon

Diverter Problem [ 1 Answers ]

I'm guessing the 5/16" bolt can be used to simply "unscrew" the stuck diverter valve by turning the bolt until it meets the back end of the diverter channel. I've done this and got the diverter valve 80% of the way out, but I think I need a longer bolt. I only used a 3" bolt. Thanks for...

Shower diverter problem [ 3 Answers ]

I have a Central Brass 3 handle tub/shower valve. It is old style with the larger seats. I replaced both valves, the diverter, and the seats. Now water will leak out of the shower in varying amounts if the water valves are opened most or all the way, even though the diverter is in the tub...

Diverter valve problem [ 1 Answers ]

Hi All, Had a problem with the diverter valve knurled end being worn, so I changed the whole valve(Danco replacement for Sayco). With the new valve, I have low pressure & also when putting water towards the shower head, it still comes out the lower spicket. How does that happen. Thanks in...

View more questions Search