Hi there, I have a 3 unit building that is a converted house. There are 3 electric hot water tanks in the basement, 1 for each unit. The tenants are complaining that when they shower and another tenant is showering, they lose the hot water. This doesn't make much sense to me as they have...

How would I wire wall switches in 3 separate locations to control power to the celing fan/light combination? I would like to still be able to use the pull cords to activate each separately if I need to, but would like to be able to turn the lights on when I come in the room (at 3 different room...

I have a twist type shower diverter and it only works in the position for the shower and not the tub spout is there a fix for this problem without replacing the diverter or do I need to replace the diverter? If the diverter needs to be replaced how hard is it to do?

Background: We have a wall-mounted shower with a diverter valve between the feed pipe and the shower head to redirect the water to a handheld shower head (principally for cleaning). The diverter is only six-years old and has a push-pull control that is becoming quite difficult to operate, and also...

I am planning to install a ceiling fan that will have two location that will each control the fan and light. The rest of my ceiling fans have 12-2 wire providing power at the switch and a 12-3 three running from the 2-gang switch box to the fan. This should allow me to control the lights and fan...