Ask Experts Questions for FREE Help !
Ask
    kdprelit's Avatar
    kdprelit Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 6, 2012, 12:12 PM
    Delta Monitor 1700 handle doesn't stop, goes around 360 degrees
    My Delta Monitor 1700 bathtub faucet was dripping so I replaced the springs and washers, no problem, the drip stopped. But, now it's 2 days later and the faucet handle won't stop where it used to, now it goes around 360 degrees. I can find the place where it should stop and the water turns off, but I'm not sure what happened since it worked at first. What should I try next? Thanks for your help!
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #2

    Feb 6, 2012, 03:26 PM
    Heloo Kdprelit,

    Open the PDF file and read how to adjust the stop, good luck.

    John
    Attached Images
  1. File Type: pdf Delta Faucet Cartrdge 1300-1400.pdf (36.6 KB, 481 views)
    2. kdprelit's Avatar
    kdprelit Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Feb 6, 2012, 03:45 PM
    I will try this when I get home. Does it matter than my faucet is a 1700? Thank you, I'll let you know if it works!
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #4

    Feb 7, 2012, 05:03 AM
    Here's a cutaway of a 1700 Delta. Good luck, Tom
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Delta 1700 series monitor shower faucet [ 10 Answers ]

This has no allen screws and was installed in 2005 when the house was built. I went from an occasional drip to a steady drip. I looked at all the local stores and they do not carry the cartridge. So, I ordered one online. Now, how to install it properly?

My delta monitor 1700 series shower knob is loose? [ 6 Answers ]

My delta monitor 1700 series shower knob is loose. It was installed with our new home in 1999. How do I remove the handle and repair or tighten? Thanks

Delta 1700 series monitor. [ 0 Answers ]

I have had this 1700 for a little over two years. Lately, I have been having problems with the hot water not being hot enough. As I have health conditions that require the water to be at max tempture it worked well for a year. Now the water may never get has hot as I like. Although the piping is...

How do I disassemble my delta monitor 1700? [ 7 Answers ]

I'm trying to fix my leaky delta 1700 monitor bath tub single-handle faucet. Currently, I'm stuck at trying to figure out how to take the handle off so I can evaluate, and perhaps bring the cartridge to my local Lowe's for recommendations... But I got to take it off first... Help?

View more questions Search