Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I have a Delta 1400 faucet in my shower that has been leaking. I took the cartridge
[ 3 Answers ]
I have a Delta 1400 faucet in my shower that has been leaking. I took the cartridge out and replaced the springs & washers and it still leaked. Someone suggested springs needed to be pulled out... did not help. Tried new cartridge in and leaked worse. Put the old one back in and tried putting...
Delta 1400 Series Single handle shower
[ 9 Answers ]
I recently replaced the cartridge on my Delta 1400 series monitor single-handle faucet, and everything seem to have gone in to place OK, I did have some trouble removing the handle and the clamp brass ring initially as it had not been moved since installation (2002), but now when I turn on the...
Delta 1400 shower controller no HotWater
[ 2 Answers ]
Have a Delta 1400 shower controller. It produces cold water only. Suspect calicum corrosion however cannot remove the cartridge. How do I achieve this?
Delta pressure balance 2300 series shower faucet.
[ 0 Answers ]
Hi, I have a Delta 2300 Series shower faucet, it has two handles, one for temperature and one for pressure. It has never had great water pressure but it has progressively gotten worse. My first thought was that the shower head was clogged and cleaned the screen and the head. I also had a slight...
Delta handheld shower head
[ 1 Answers ]
I just installed a Delta shower massage head, and it has about half the water pressure of the old head I replaced. Is there any way to increase the water flow, like some kind of restricter in the hose or head? View more questions Search
|