 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Custom shower stall
I live in trailer, and have a garden tub 4'8" deep to corner wall and span of up to 7' feet to allow for electrical switch upon entry. I want to replace this with an extra comfortable shower with low step into shower pan base and new walls. I will bring up the water flow to create the shower spout(s) one for me and one for him. What do I make the walls out of and how do I waterproof the walls. Will I use the plastic sheet for the pan as well as the walls? And, to make it deep enough to use a shower curtain and not doors, how do I do that. Thanks, Laura, Ariton, AL
|
||||
Check out some similar questions!
Ok here's a problem I'm having my mother is getting old and I want to remove her tub and install a shower stall with a bench seat with elderly grab handles. Here's my question. After I build the bench seat on the back side of her new tile shower stall. How do I stop water from penetrating the seat...
how do you form the curb for a mud set shower stall? Is it just 2x4s stacked and wrapped with membrane and durarock, or do you have to pour the curb with the first layer of mud and then wrap it and pour a second layer higher?
Hi all, I ripped out an old shower stall from the basement of my house. I am left with a drain location of 18 x 18 inches from the corner. I would like to install a custom shower area that would be larger then the 36 x 36 shower I had. I cannot find a shower pan that is 48 x 36 to 42 inches with a...
Hello, Could you give me specific steps to build custom shower base - what is the best membrane to install in the shower base, how to do it as well how to attach it to shower drain Thanks Bogdan
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
