Ask Experts Questions for FREE Help !
Ask
    Nosh's Avatar
    Nosh Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 29, 2009, 09:00 PM
    Cracked toilet bowl & low water level in toilet
    Hi Everyone,

    So I've got two questions regarding two toilets and would appreciate any and all help as I can't afford someone to come in at this point to fix it for me.
    1. I managed to drop a crystal (decoration) ball into the toilet which cracked the bowl so a chunk of the porcelain just fell off. Luckily the piece was above the water level so I didn't have a gush of water on the floor. But the toilet is obviously now unusable. Can I fix this and how? We have tried putting a bit of silicone (I think that's the right way of spelling it) but I think it's still leaking a bit.

    2. The other toilet has a low water problem. It flushes a bit slowly (have to hold the flush down until I hear the water gurgle down) and it fills up very low so 2-3 flushes are sometimes required even after my 3 yr old goes for a poo. How can I fix this?

    Nosheen
    TheClimateGuy's Avatar
    TheClimateGuy Posts: 27, Reputation: 2
    New Member
     
    #2

    Jun 29, 2009, 09:09 PM

    The first toilet.. shut off the water at the tap just below the toilet. Flush the toilet to drain the tank and make the level go low in the bowl. Dry the bowl, and the little piece, then leave it alone for 15 minutes to make sure its dry. Then use some stuff called PL Premium... its an industrial adhesive... comes in a tube that looks like the silicone tube you have. You can find PL Premium in any hardware store prettymuch. Apply some PL into the hole, and onto the piece, and press it in the hole really well. Wipe any excess PL off the bowl right away... cause when it's dry... its dry. Let it dry for 24 Hours before you turn the tap on and flush the toilet... and of course don't use it between. But you really do have to let it dry for 24 hours... a tube of Pl will cost you six dollars.

    The second toilet... could possibly be adjusted... but sounds like it needs a new set of internal mechanics. Probably be the only solution realistically... without having someone in to look at it. Just remember to turn the tap off first if you're going to do any toilet work! Cheers!
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #3

    Jun 30, 2009, 12:48 AM

    Remove tank lid . Inside tank is overflow tube. Water should be 1'' from top of tube.
    See pic
    Adjustment can be made moving float adj.

    Chuck
    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toilet - bowl water level low [ 1 Answers ]

Hello fellow Members, I've got an issue where the water level in my toilet bowl is lower than normal from when I first installed it a few months ago. I've recently changed my toilet to an American Standard Champion type with a class 4 flush. The thing works like a star but after a few months the...

Water level in toilet bowl [ 1 Answers ]

The toilet bowl is always filled with 3/4 bowl of water . Is it OK or does it need repair?

Toilet bowl water level [ 3 Answers ]

How can I raise the level of water in a toilet bowl.

Toilet bowl water level [ 3 Answers ]

My super & I are stumped. We have a unit that the water level decreases after about 2 hours to almost nothing. It makes no sounds; i.e. gurgling, bubbles. There is no water on the vinyl, or anywhere else. The unit has been occupied for sometime, and only recently developed this problem. The wax...

Toilet bowl water level [ 2 Answers ]

After installing a new valve the water level in the toilet bowl is too high. Is there a regulater on the valve?


View more questions Search