How do I convert a bath tub drain to a shower drain? The bathtub drain is an inch and a half pipe and I need to convert it into a 2 inch PVC. The house that I am working in has a concrete foundation.

My minute Manhattan bathroom has a 36" x 36" tiled shower stall enclosed by 3 walls (yes, the bathroom is only 36" wide!) and a 6" marble ledge. The whole bathroom, tiles and all, is going to be demolished for the remodel. Here's my question: can I make a small soaking-type bathtub in this 36"...

My question refers to a half bath we are in the planning stages of converting to a full bath in the basement. Currently our basement has a half bath with toilet and sink on one half of the basement. There is then a shower on the other side of the basement with the washer and dryer, about 30 feet...

I have an old claw foot tub in my downstairs bathroom and it has a "double basin faucet" spout instead of the regular single spout. Which means the cold water comes out one spout and hot comes out another. I need to find some type of hose adapter that would allow me to hook up an hand held doggy...

I would like to remove my standard bath tub and install a large shower stall , all on a concrete slab. My question is with the drain. Do I have to slope the new floor over to the existing drain? Break up the concrete and move the drain? How large do pre-made shower bases come? ...