Ask Experts Questions for FREE Help !
Ask
    freeflowin's Avatar
    freeflowin Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 25, 2008, 04:34 PM
    Can't get faucet apart
    I have a drip on the hot side of my Delta faucet. It is a single handle bathroom faucet. I removed the small cap on handle, then the handle itself, but cannot remove the white plastic shield in the center or the chrome cover around it. Neither will turn and I actually moved the whole sink trying! Any suggestions will be greatly appreciated.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Nov 25, 2008, 05:05 PM

    Surf this site and see if you can get to your model installation instructions. Installation : Frequently Asked Questions : Delta Faucet
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #3

    Nov 25, 2008, 09:25 PM

    Hello freefowin,

    Open Bob's link it will help you, if you have the model number please post it that we will give the exact details, Thanks.

    John
    Milo Dolezal's Avatar
    Milo Dolezal Posts: 7,192, Reputation: 523
    Plumbing Expert
    		  
    #4

    Nov 25, 2008, 11:00 PM

    Yes, it is hard to remove that white plastic round piece w/o loosening the metal piece. You unscrew the entire metal cone-shaped cup that holds that plastic round piece in. Than, the plastic nut will unscrew easily. Make sure you turned hot and cold water off before you do anything.
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #5

    Nov 25, 2008, 11:52 PM

    I am sending you the link below I hope it will help you, Thanks.

    John
    Attached Images
  1. File Type: pdf 27128RevC_9635[1].pdf (139.2 KB, 253 views)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need to replace 'O' rings and Gaskets in Delta Faucet [ 1 Answers ]

My Delta faucet which is probably 30 years old constantly drips. I have replaced the shower head so know it is the faucet. It is a single handle push up for on and twist to the right or left for temperature control. How do I replace the o rings and gaskets? Thank you

Kitchen Faucet Sprayer On - Main Faucet not totally off [ 2 Answers ]

We moved into a new house - new construction. When we use the sprayer in the kitchen faucet, water comes out the sprayer as it is supposed to, but the water does not completely shut off in the main faucet. There is still a thin column of water coming out. We had the faucet replaced, and this...

Water suppressor needed on lavatory faucet and shower faucet? [ 1 Answers ]

Are water suppressors needed in the bathroom sink faucet and the shower stub out also? And can you just use a length of pipe on a T, or must you use those copper chambers? (cpvc system) thanks

Low hot water pressure from kichen faucet only- 1 handle faucet [ 7 Answers ]

Hi. My question is similar to one asked a few posts ago except this is a 1 handle faucet. I plan on maintaining the boiler from now on but I have to fix the flow problem first. I disconnected the hot water supply line to the faucet and the pressure is excellent so I assume the problem is in the...

View more questions Search