I am in the process of replacing my toilet and am having some problems as the "parts" do not seem to be like the DIY videos. I live in a 4 unit condo on the top floor. Building was built in late 70's early 80's. When I removed the old toilet and the old wax, I noticed the flange was broken. ...

Hi all, I don't know what the previous owner did, but when I got to it - the toilet was wobbling and the nuts were tight. After removing the nuts and the toilet I found the flange to be bent up on one side and torn on the other. The pipe is Lead (Pb) 3-4 inches at the top and cast iron the...

To whom it may concern: I got a problem with a toilet that has been rocking and twisting for quite some time until it started leaking and what now I pull up the toilet to find out that the flange is broken on one side. I tried that flange plate from home depo but it won't work because the slab is...

I've got a 4" cast iron waste line with a slab floor. The pipe is 2 1/4" below the floor surface. The replacement flanges I have found are only 3" long. Is this 3/4" enough for a good seal? Does anyone know if there are longer replacement flanges out there? Thanks

I am replacing the flooring and toilet in my upstairs bathroom. The underlayment is in good shape under the toilet flange, so I don't plan on replacing it. But the flange is broken. I've removed the flange bolts, but the flange is glued to the pipes. I can't get it off. Is there an easy way to...