I just let all the pressure out of my AO Smith aqua air v140 to patch a pin hole in the bottom of the tank, when I put air in he tank with a pressure switch of 40/50 how much air do I put back in the tank?
Add your answer here.
Check out some similar questions!
A.O. Smith Aqua-Air Model V60 Water Pump and Storage tank [ 2 Answers ]
We have an A.O. Smith Aqua-Aid Model V60 Water pump and storage tank. The pressure fluctuates between 35 and 58 psi when water is running. I believe this to be normal. My issue is after a period of non-use and water is run the tank will make a "bang/clunk" sound when the pump turns on. It...
What is the cost of an ao smith aqua-air water system tank model v60 [ 0 Answers ]
What is the cost of an ao smith aqua-air water system tank model v60
Aqua-air v100 psi? [ 6 Answers ]
Hi, we have a V100 and have had pressure problems lately in the house we just moved into last year (it's been fine until the other day). Tom stated that the tank pressure should be 2 psi below the pump cut-in. Our cut-in is about 38-40 psi but the tank pressure is 60 psi (the previous owner said...
O.a. Smith, aqua air pressure tanks [ 0 Answers ]
I have an O. A. Smith Aqua Air Model V60 pressure tank that needs to be replaced. Is there a supplier in the Winnipeg Manitoba area where I can obtain a new tank? Is there a source elsewhere from which a tank can be ordered?
Aqua Flow V60 Water Pressure Tank [ 1 Answers ]
I have water coming out my air valve which generally indicates the bladder is shot correct? However, it appears the tank is not completely full of water as when I tap up the side of it it's clear that the water is not fully up the tank. Obviously I can't get the hose on to see exacty what the...
View more questions Search