Ask Experts Questions for FREE Help !
Ask
    icunow's Avatar
    icunow Posts: 1, Reputation: 1
    New Member
     
    #1

    Dec 1, 2006, 11:03 AM
    American Standard Plebe toilet tank
    Getting old I guess, anyone know the tank to bowl bolt spread on a American Standard Plebe (the old ones), can't remember if 51/4 or 51/2 inches.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Dec 1, 2006, 11:18 AM
    My American Standard rough in book doesn't give those measures. Why do you wish to know? Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toilet Tank Cracked [ 28 Answers ]

Toilet tank has a hairline crack along bottom from the mounting bolt and up right hand side about 4 inches and lets water seep out. What can I apply to the inside of the tank to seal the crack? If it cannot be repaired, where can I find replacement ?- It is American Standard, Model Number...

Toilet tank not filling [ 3 Answers ]

Got a mystery here: I just moved into a new house and the toilet tank in the 2 piece bath on the main floor is suddenly not filling. I unscrewed the feed line into the tank and tested to see if there is water flowing through it and there isn't. The sink taps both work fine - just no water into...

American Standard - dripping from shower head [ 5 Answers ]

Hi, I have a problem with water dripping from my shower head. I have American Standard hardware with a single lever knob (shower only, no tub). I installed a new cartridge 023529-0070A but that has not fixed the problem. My house is only 4 years old. I'm not a skilled DIY type but this...

Toilet tank [ 3 Answers ]

Hi I needed a new toilet tank and I've put it on the bowl. My problem is now when it is flushed, the flapper will not stay open long enough to drain water from bowl. When the lever is pulled, the flapper opens water starts to leave the tank, but then the flapper closes and the tank fills back...

Toilet tank installation [ 2 Answers ]

I'm putting in a Kohler toilet (2 piece) and don't know how tight to put the tank on. Should I still be able to wobble it around or would that be to loose? The problem I am having is that if I tighten all of the three bolts the same the tank is not level front to back (the front is lower than...


View more questions Search