| 
 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
Adding a shower to a roughed in toilet
 [ 5 Answers ]
 We currently have a unfinished basement with a toilet and sink. I would like to add a shower. How can we do this. Step by step. The toilet is in the corner and feeds into a floor drain (we have a separate cast iron pipe that feeds the rest of the house). THe sink feeds into the same floor... 
Adding bathroom to basement
 [ 12 Answers ]
 I am finishing our basement and adding a bathroom. The builder did not stub in the drains so I have to do this. What do you recommend I use to break up the concrete floor where I'll be adding the sewer and shower drains? I was thinking about renting an electric jack-hammer. I had also... 
Need some help with venting, moving toilet adding bath
 [ 9 Answers ]
 I am moving my toilet to the other side of the bathroom, and adding a tub. My bathroom is very small 5' X 7' and I only have one existing vent. The vent is 2" in the wall and is 3" coming out of the roof. Anyway, I was wondering if this piping plan would work, or if someone has a better way to do... 
Moving a toilet and adding a sink
 [ 3 Answers ]
 I am remodeling a bathroom in a 150 year old house so there are several unusual features. I want to move a toilet that is on a 3 inch copper line 6 feet away from the 3 inch copper drain stack. It is currently 2 feet away. The vent at the main stack is 2 inches and it is at a 90 degree angle to... 
Adding sink and shower
 [ 1 Answers ]
 I currently have on one side of my bathroom a large cast iron tub and a sink with vanity. However I want to move the sink over to the other side of the room but there is no water line there, also I want to put a corner shower unit in place of the old sink how would I go about making the old spot... View more questions Search 
 |