Ask Experts Questions for FREE Help !
Ask
    Jill Manton's Avatar
    Jill Manton Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 12, 2012, 02:33 PM
    Adapt a Kohler Rialto Toilet to a 1.28 g flush?
    Is this possible? Does such a kit exist? I have to either adapt my existing toilet or replace it with a low flush before I sell my home.

    Thanks for your time,
    Jill
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Oct 12, 2012, 03:20 PM
    Hi Jill

    As you probably know, the Kohler rialto toilet is a 1.6 GPF toilet and it is very specific in that it cannot be modified as some of the newer toilets can be nowadays. They also sell retrofit fill valves to reduce the toilets from 1.6 to 1.28 GPF, but I'm quite sure that these kits won't work with the one piece rialto toilets.

    You can double check me by calling kohler's tech. support line and see what they say on the matter.

    Check them out at this link:

    KOHLER | Contact Us

    Let us know what they tell you, OK? I'm pretty sure you'll need to replace that rialto with a newer toilet... ;)

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Toilet flush: When I flush the toilet the water does not wash all around the bowl. [ 10 Answers ]

Toilet flush: When I flush the toilet the water does not wash all around the bowl. There is always a section at the front that doesn't get washed. I have tried pushing the end of a wire coat hanger around the rim, and I have used copious amounts of cleaner. Does anyone have any suggestions?

How do I make my Kohler 1.6 gallon toilet flush with more force [ 4 Answers ]

How do I make my Kohler 1.6 gallon toilet flush with more force so all the contents go down and it doesn't have to be flushed twice.

Correct Trowel for Rialto 6" Wall Tile and for Rialto 12" Floor Tile? [ 1 Answers ]

I have a hardibacker tub surround that I plan to tile in 6X6 Rialto 3/8" porcelain tile and a hardibacker floor in 12x12 Rialto 3/8" porcelain tile. I believe I am supposed to use modified thinset in both instances, and Laticrete Spectraset has been recommended. Please confirm? For the floor...

First Flush of Toilet does NOT work right BUT second flush works great? [ 4 Answers ]

We have 2 toilets and both have the same problem. The first flush does NOT work right and will NOT flush completely, water rises and then goes back down. The second flash works GREAT? We have plunged and clean out all blow or jet holes NOthiNG is plugged? Short of double water bills and the...

View more questions Search