Check out some similar questions!

scseibert · Aug 23, 2016, 06:05 AM

I have what I think is a Glacier Bay single handle kitchen faucet. Problem is water only trickles out. Larger problem , getting a replacement cartridge to try. Glacier Bay reps don't recognize 67070-3004 as their model number. Purchased Home Depot 2012. They say model numbers start with a letter J - any help identifying this would be appreciated.

Milo Dolezal · Aug 23, 2016, 09:51 AM

Unscrew the aerator from the tip of the spout and run water without it. See if you get good flow. Clean aerator under running water, reinstall.
Also, Close and Open both valves under the sink. While there, check water supplies making sure they are not kinked

If nothing helps, go back to HD and talk to somebody at service desk to help you. Take a picture of the faucet and bring it with you. They should be able to ID the faucet and sell you the cartridge.

Hope that helps

Milo

ma0641 · Aug 23, 2016, 01:30 PM

HD model #s are usually 6 digits in a 2x3 format. 237-667 for example. Go to HD, check to match and look at the box code.

scseibert · Aug 31, 2016, 02:00 PM

Thanks for input and advice. It turned out to be a defective check valve in the flexible hose. Was blocking 95 % of flow. I sent pictures of the faucet to Glacier Bay customer service and they are sending a replacement part. I bought it as All In One Sink with faucet. Made it harder to research specific part number for faucet. Thanks again.

Milo Dolezal · Aug 31, 2016, 08:54 PM

Glad you got it solved and you are back in business !

Milo