Ask Experts Questions for FREE Help !
Ask
    tommytman's Avatar
    tommytman Posts: 153, Reputation: 2
    Junior Member
    		  
    #1

    Feb 26, 2005, 04:04 PM
    2 inch adapter for lav sink?
    I'm putting in a pedestal sink but the old lav p-trap goes from the standard 1 1/2 inch or 1 1/4 inch (tailpiece connection) to a 2 inch female pipe thread connection. A piece of galvanized 2 inch pipe (male threads) then connects to the drain in the wall.

    All of the nice chrome drains these days are all 1 1/2 inch. Does anyone know of a 2 inch adapter I could use??
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Feb 26, 2005, 04:59 PM
    2 inch adapter for lav sink?
    Quote Originally Posted by tommytman
    I'm putting in a pedestal sink but the old lav p-trap goes from the standard 1 1/2 inch or 1 1/4 inch (tailpiece connection) to a 2 inch female pipe thread connection. A piece of galvanized 2 inch pipe (male threads) then connects to the drain in the wall.

    All of the nice chrome drains these days are all 1 1/2 inch. Does anyone know of a 2 inch adapter I could use???
    No prob Tommy,
    Ask for a PVC male 2" IPS,(iron pipe size)X 1 1/2" compression adapter and connect a 1 1/2" chrome "P" trap with a 1 1/2 X1 1/4 gasket to connect up the 1 1/4" tailpiece. If the trap tail's too short then use a 2 X 1 1/2 female adapter and extend out with a piece of 1 1/2" PVC. Glue a PVC 1 1/2 PVC X 1 1/2" compression adapter on the end of the 1 1/2" stub out to install the chrome trap to, Good luck, Tom
Not your question? Ask your question View similar questions
 

Add your answer here.


Check out some similar questions!

Network adapter [ 3 Answers ]

I am back again.. by the way I never resolved the other issue but was wondering if I could trouble you again. I am trying to install Comcast onto my laptop but it says I do not have a network adapter. Now the question is this. . talked to comcast no help talked to some other people no help. What I...

Craftsman Riding Mower 23 Kohler hp 24 inch deck [ 11 Answers ]

I recently went out to mow my lawn with this otherwise reliable machine. I pulled the PTO clutch switch to engage the blades. They started to rotate and I was on my way, for about 30 seconds and then the blades stopped rotating. The motor runs perfectly yet the drive unit for the blade belt does...

Network Adapter Question [ 1 Answers ]

I recently got Comcast Internet. If I ever want to upgrade my P.C. or switch network adapters, can I simply unplug the modem and put it into the new network adapter? Do I need to contact Comcast or do most cable modems allow that kind of switching easily?

USB - PS2 (p/s2) adapter [ 5 Answers ]

Hi I have a laptop with XP and a dancemat which I use with it by using a USB-PS2 adapter - effectively the dancemat is a keyboard. This works fine with an old adapter of a friend which has the words "AWG space shuttle-c CSA LL80671 AWM IIA/B 80 degrees c 30" written on the wire. I bought a new...

Infrared adapter [ 9 Answers ]

I have purchased a china make IrDA adapter (USB). But when I tried to install the driver, I got a message that the driver is not having windows logo stamped. Will it be harmful to the machine if I install this? Any suggestions to overcome this? Thanks

View more questions Search