Ask Remember Me?
 spacefire5458 Posts: 84, Reputation: 1 Junior Member #1 Jul 27, 2007, 06:32 PM
work,kinetic energy
In the equation for work why do you multiply force times displacement distance could'nt you just multiply forcec times the time it took the object to cover the displacement distance?
 Capuchin Posts: 5,255, Reputation: 656 Uber Member #2 Jul 27, 2007, 11:54 PM
No, work is fd, whereas impulse is ft.

Not your question?

 Question Tools Search this Question Search this Question: Advanced Search

## Check out some similar questions!

Work, energy, power [ 1 Answers ]

Rowan and jean are tobogganing on an old pasture with rolling hills. At A the hill is 14m high; at B, 2.8m, at A, the toboggan is just beginning to slide. a)if there is no loss of mechanical energy, what is the velocity of the toboggan at B? b) if 25% of the mechanical energy at A is lost by B,...

Potential Energy- Bonding Energy [ 1 Answers ]

Question: The net potential energy between two ions (e.g. Na+ andCl-) can be Represented as follows: EN =EA+ER = -A/r +B/rn (a) Calculate the bonding energy E0 in terms of the A, B, and n ...

Static friction and kinetic friction [ 2 Answers ]

:confused: :confused: A force of 30.0 N is required to start a 4.4 kg box moving across a horizontal concrete floor. (a) What is the coefficient of static friction between the box and the floor? (b) If the 30.0 N force continues, the box accelerates at 0.50 m/s2. What is the coefficient of...

Kinetic friction [ 5 Answers ]

A curler throws a curling rock with a speed of 10.5m/s down a curling rink. The mass of the curling rock is 20kg. The coefficent of kinetic friction between the rock and the ice surface of the rink is 0.05 The length of the rink is 28.4m The speed of the curling rock when it reaches the opposite...

Internal and Kinetic Energy. [ 5 Answers ]

1. The problem statement, all variables and given/known data A 14.0 kg block is dragged over a rough, horizontal surface by a 78.0 N force acting at 20.0° above the horizontal. The block is displaced 5.00 m, and the coefficient of kinetic friction is 0.300. (a) What is increase in internal...