Maximum power transfer

alex109 Posts: 2, Reputation: 1

New Member

Apr 13, 2013, 11:26 PM

Maximum power transfer

What is the logic behind maximum power transfer theorem? Why should the power delivered should be maximum if the load resistance is equal to the internal resistance of the circuit??

Check out some similar questions!

Maximum power demand on electric circuit [ 1 Answers ]

How do you determine the maximum current demand on a ring circuit

Connection of transfer switch when power distribution is split between 2 panels [ 9 Answers ]

Here’s my shop and home power configuration. Power is fed from the grid into a 200 amp box in the shop. The shop box feeds: 100 amp breaker (heavy gage feed wires out of breaker) feeding 240V to the houses 100 amp panel 30 amp 240V to the water pump 15 amp to a monitor heater to keep the...

Connection transfer switch when power distribution is split between 2 panels [ 0 Answers ]

Generator power transfer switch [ 1 Answers ]

Our power goes off on a frequent basis. If it is off more than 8 hr I need to power up with my own generator 8kw, to prevent spoilage and to run the well. My question is do you have to disconnect the neutral also and run the neutral to the generator or can the neutral be common to both power...

Power and energy transfer [ 1 Answers ]

:eek: A loaded ore car has a mass of 950kg and rolls on rails with negligible friction. It starts from rest and is pulled up a mine shaft by a cable connected with a winch. The shaft is inclined at 30.0 degrees above the horizontal. The car accelerates uniformly to a speed of 2.20m/s in 12.0...

View more questions Search

Check out some similar questions!

Add your answer here.