Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring an Intermatic T104 timer to operate high- low speed
[ 6 Answers ]
I have a koi pond that moves the water with a Hayward Super 2 pump and a 2 hp. A.O.Smith 220v motor. I replaced the T104 timer, which I wired to be lowspeed/ high speed mode instead of on/off, as the Koi need constant water flow. Problem is this: I disconnected the wiring thinking it was a wiring...
Chain pull hunter, no middle speed. Starts high, then low, then low, then off.
[ 1 Answers ]
Three speed hunter ceiling fan. 8 years old. Pulling chain was guessing game. Never knew what speed you'd get, Had to keep trying to turn off, never worked like it should. Had a handy man put a new switch in, now it starts in high speed, then low speed, and low speed again, then off. Can't get...
Can you hook up the high speed wire to the medium speed wire on blower fan
[ 20 Answers ]
My blower fan has 4 wires but unit has 3 the high speed wire from blower has nowhere to go what do I do because we have very low air flow
High-speed Cable/low Speed Operation
[ 1 Answers ]
I had Time Warner Cable(TWC) Road Runner service(high-speed cable) installed recently on my Panasonic CF-47 Laptop. It turns out that it operates two times SLOWER than Dial-Up!! I have a W98 O/S. The High-speed cable into the computer measures normal(as measured by a super-tech with TWC). After he... View more questions Search
|