Ask Experts Questions for FREE Help !
Ask
    Aniruddh Vyas's Avatar
    Aniruddh Vyas Posts: 25, Reputation: 1
    New Member
    		  
    #1

    Apr 20, 2008, 07:57 AM
    AC circuit
    For the given figure(attached), the current drawn through the inductor is .9A while the current drawn through the condenser is .4A. Find the current drawn from the source.
    Attached Images
     
    ebaines's Avatar
    ebaines Posts: 12,131, Reputation: 1307
    Expert
    		  
    #2

    Apr 21, 2008, 08:12 AM
    Kirchoff's Current Law - the sum of the currents into a node must equal the sum of currents flowing out of that node. Take a look at the node on the right that connects the two components to the current source and apply Kirchoff's law.

    See: http://en.wikipedia.org/wiki/Kirchhoff's_circuit_laws
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Theory of vacuum Circuit Breaker & sf6 circuit breaker [ 15 Answers ]

I want to know about the basic Theory of vacuum Circuit Breaker & sf6 circuit breaker

Changing 15 amp circuit to 20 amp circuit [ 4 Answers ]

I just bought a house with a jaquzzi that was installed by the previous owner. It appears that they wired it to an existing circuit run that is only pulling 15amps. So if the lights are on in the bath room and in the closet, when we turn on the jaquzzi it trips the breaker. Before I open up the...

Converting 15 anp circuit into 20 amp circuit [ 1 Answers ]

I just bought a treadmill. The problem is it doesn't work where I want it to. It can only run on 20 amps but all my outlets use 15 amps. It keeps tripping the breaker. Can I easily convert my outlet to a 20 amp?

New Circuit [ 1 Answers ]

Am going to run a new circuit about 115' underground to middle of front yard for xmas decorations and such. Will have 2 recepticals. What size wire and breaker will I need , and does it need to be in conduit?

Outside GFI circuit - 15amp outlet on 20amp circuit [ 1 Answers ]

I need a better understanding of what I should do when setting up my new outdoor circuit. I've got a circuit that runs about 150 feet, so I'm installing 10g wire to allow for the voltage drop. I read in the Home Depot Electrical 123 book that I can have at most a 15amp circuit with 10g wire on...

View more questions Search