Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Setting Spring Tension
[ 0 Answers ]
A mill door at work weighs 1 Ton, There is a spring mounted in the door that is supposed to be set at 15 Ton compressed spring tension. I was wondering if it mattered if the weight of the door (once its laid down then it is pressing on the stud, hence compressing the spring a little) adds the 1 Ton...
What is the acceleration of the blocks and the tension in the string
[ 1 Answers ]
Block A has a mass of 6.07 kg and is on a rough incline of 12.5o to the horizontal. Block B has a mass of 4.82 kg and the coefficient of kinetic friction between Block A and the plane is 0.268. What is the acceleration of the blocks? What is the tension in the string? Could someone please...
Can if there be 0 N of tension in a string?
[ 2 Answers ]
Two Objects of masses of 1 kg and 5 kg are connected together by a light string that passes over a frictionless pulley. What is the tension in the string? What is the acceleration of the block? When I calculated this I found that the tension in the string was 0 N and that the acceleration was...
Tension in a string
[ 1 Answers ]
A 2.09 kg block is placed on top of a 10.9 kg block. A horizontal force of F = 63.3 N is applied to the 10.9 kg block, and the 2.09 kg block is tied to the wall. The coefficient of kinetic friction between all moving surfaces is 0.117. There is friction both between the masses and between the...
Where does the tension spring go on a 42 "deck
[ 0 Answers ]
Where the tension spring hooks up on this 42 " mower View more questions Search
|