How much pressure to be applied to the cube to reduce the edge length 85.5 to 85.0 cm

kak_tie87 Posts: 1, Reputation: 1

New Member

Nov 14, 2010, 09:28 AM

How much pressure to be applied to the cube to reduce the edge length 85.5 to 85.0 cm

Unknown008 Posts: 8,076, Reputation: 723

Uber Member

Nov 14, 2010, 09:49 AM

It will all depend to the spring constant of the cube, it's Young Modulus, it's area and it's length...

Add your answer here.

Check out some similar questions!

The perimeter of the pool is 97m, the width is more than 1/2 the length,length=? Widt [ 1 Answers ]

The perimeter of the pool is 97m, the width is 2m more than 1/2 the length, what is the length and width of the pool?

Calculate the length of an edge of this unit cell. [ 13 Answers ]

Silver forms face-centered cubic crystals. The atomic radius of a silver atom is 144 pm. Consider the face of a unit cell with the nuclei of the silver atoms at the lattice points. The atoms are in contact along the diagonal. Calculate the length of an edge of this unit cell. I don't...

HP Pavilion dv4000 freezes unless pressure is applied [ 1 Answers ]

I've got a strange issue with my HP Pavilion dv4000... For a little over a year, it's been occasionally freezing. It freezes in a strange way, in that it seems that the computer has frozen but if I press on the lower right corner of the laptop, the computer will unfreeze. It'll even register...

Applied math, arc length, change of parameter [ 10 Answers ]

Here's a arc length problem maybe you'd like to tackle: "Copper tubing with an outside diameter of 1/2 inches is to be wrapped in a circular helix around a cylinder core that has a diameter of 12 inches. What length of tubing will make one complete turn around the cylinder in a distance of 20...