 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
PLEASE HELP - A.C. Generator
Please help me with this problem, I don't know how to do it. Please! Please! Thanks in advance.
An ac generator has a circular coil of 500 turns and diameter 0.640 m which rotates about an axis in the plane of the coil and through its center. The coil rotates at 97.5 revolutions per second in a uniform magnetic field 0.240 T which is perpendicular to the axis of rotation. Give your answers to at least three significant figures. 1. What is the peak emf (in V) generated across the generator coil? 2. What is the rms emf (in V) generated? |
||||
Check out some similar questions!
I have a wolf generator wp3500LR, which has been running like a dream, until today. It just cut out and I haven't been able to get it going again. I've checked the petrol and oil levels and both are fine. I'm not machanically minded so I haven't got a clue. Please help.
We have a Briggs and Stratton 6200 generator, sat up too long. Gas runs through gas line to carb but stops there and doesn't go to the bladder and float. Will run long enough to empty the bladder but then dies. Any suggestions? Please help, need to use generator for power this weekend.
Generator wiring: I have a new honda generator. I ran 3 wires from the garage to the transfer switch in the house. When I start up and throw in the breaker on the generator, its GFCI trips immediately. It is a long run (125ft) run to the house and I used heavy wires. But I only ran 3 (blk,...
For connecting 7 MW generator to generator transformer, which is better cable or NSPB ?
I require for a Power Plus 5000 Generator 1 generator under following specifications: 5000 Watts, 120V, 1 Phase, 60 Hz at 3600 RPM, 3720 RPM at no-load. Thank you, Publio
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
