Ask Experts Questions for FREE Help !
Ask
    oliverb's Avatar
    oliverb Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 23, 2011, 02:22 PM
    I have a solid mechanic question...
    A steel pipe of length 1.8m, outside diameter of 116mm, wall thickness of 8mm, is subjected to an axial compressive load of 180kN. Assuming E=200GPa and v=0.3, find a)the shortening of the pipe, b)the increase in outside diameter and c)the change in wall thickness. Anyone?
    peon2001's Avatar
    peon2001 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Nov 13, 2011, 06:59 AM
    I have a 1992 Nissian Pickup, I rebuilt everything and purchased a refurbished head from advanced auto. After getting the engine going it seems as though the lifters are knocking. Are these adjustable? If so where is the adjusting screw?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Do I sell it to the mechanic? [ 4 Answers ]

I have a 1978 Mercedes 240D with about 238K miles. A belt for the coolant fan broke recently so it overheated, though it never reached the red on the heat gauge, and since then the coolant level has been going down, at first slowly, now faster, so I've been refilling it, though I don't see it...

Ask honda mechanic [ 0 Answers ]

What works the ground transistor in the pcm for pin A17 --- the ground for the ac system... is it internal of does another pin feed to it... this is on a Honda Odyssey... with electronic climate control... dual system (front and rear)... 3.5 liter... I can ground system here with power probe and...

Inform Me About A/C Before I See a Mechanic [ 3 Answers ]

Not last summer but the summer before last I had to add a can of freon to my 98 Ford Contour SVT and it was cold all season. Last summer I had to add 2 cans and as the end of season approached I noticed that it wasn't as cold as it was earlier. But, it was close enough to the end of season that I...

Mechanic needed [ 1 Answers ]

My Nissan Altima (2001) with 98,000 miles is burning oil at an alarming rate. The back end of my car is full of black sludge. What could the problem be?

View more questions Search