 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Design Process for a Square Pipe Clamp
I have a homework assignment to outline a design process and create 3 freehand concept drawings for a wall mounted clamp that can hold a 40mm wide square pipe.
I am completely unsure about what to do and what kind of information I need to gather. |
||||
Check out some similar questions!
I have a homework assignment to outline a design process and create 3 freehand concept drawings for a wall mounted clamp that can hold a 40mm wide square pipe. I am completely unsure about what to do and what kind of information I need to gather.
How many plumbing vent pipes can tie into the same two inch vent pipe going through roof ?
I have to design a pipe pillar which has to bear the load on top for 1000 kg at a height of 7 meters. The wind speed is expected to be 100-150 km/hour. The load on top has a width of three meters and a height of 3 meters. Provide me with the minimum diameter and thickness of the pipe required to...
I took off the old tub spout and am replacing it with a new one... just a simple universal one that has a diverter. Thought that this would be an easy task, but the pipe stub isn't square with the wall, so when the spout is installed, there is about a 1/4" gap on the top between the wall and the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
