Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I find a replacement for my 3 blade Fan assembly for my outside condenser
[ 1 Answers ]
My Fan blade assembly was bent when I replaced my Fan motor!! Grainger has them for $55 dollars and the $92 dollar one looks like my origanal,does it matter and How do I factor in the pitch.I guess I need to find a counter person that knows about that? Whereas Grainger support is by phone. ...
Fan Motor or Blower Motor? Trane XB80
[ 0 Answers ]
Outside fan motor clicks and hums - are the fan motor (outside) and blower motor (to circulate the air) tied together? i.e. if one is out, neither will work? If so - how do you diagnose which motor is out? This is on a Trane XB80 Furnace & Air Conditioner
New fan motor new capacitor motor burned up
[ 2 Answers ]
Air went out. Replaced outside motor fan and capacitor and it burned up again. Fan was very hot when I took it out. Causes?
New Fan Motor - WIRING issue - not the same as old motor - SIBERIANAIR - are you here?
[ 3 Answers ]
I have a 7 year old Trane XE 1000 and 2 days ago the fan simply stopped spinning. It has been determined that it is the fan motor. I went and bought a new one but this motor comes with 4 wires (Black, White, Brown and Brown with White stripe). The old motor came with three wires which were Purple,...
Condenser fan quits
[ 19 Answers ]
My condersor fan was trying to turn very slow. I removed it and oiled it and it freed up. Only ran 30 min then quit. Compressor still running.replaced fan motor it had a 1/3 hp installed a 1/4 same amps and rpms. Would run 50 min then quit. Replaced capacitor it was a 40/7.5 it ran but no cool air.... View more questions Search
|