Ask Experts Questions for FREE Help !
    42424242's Avatar
    42424242 Posts: 2, Reputation: 1
    New Member

    Mar 31, 2008, 06:30 PM
    Transaxle oil seals 1999 craftsman tractor
    How do I remove and replace oil seals on the transaxle, there are one on each side.
    The seals are around the axles and into the transaxle on each side.
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member

    Apr 1, 2008, 06:32 PM
    Well, have you ever had a transaxle apart? It is not really that bad, but split the housing and remove the seals, then replace seals, and put the transaxle back together. Can be a mess though at times. Be sure and pay attention to the parts.

Not your question? Ask your question View similar questions


Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.

Check out some similar questions!

Craftsman Lawn Tractor Oil Filter [ 5 Answers ]

Hello, I have just replaced the oil in my Kohler engine on a Craftsman gt5000. It was at that point I noticed some seepage from the oil filter can (52-050-02). I haven't changed the filter before and am wondering if it can be replaced while oil is in the engine or do I have to drain it...

Craftsman tractor [ 3 Answers ]

Hi hope you can help I have a 17.5 hp lawn tractor only 5 years old I use it for mowing and in the winter I have a snow plow on it this winter has been a bear I have went through three starters in four weeks runs like a champ then poof there goes the starter again I just get a click when I try to...

Craftsman garden tractor makes noise when transaxle is engaged [ 4 Answers ]

I have a 2000 Craftsman Garden tractor that makes a pretty rough noise after I engage the transaxle. And it sounds like its coming from below the motor and not towards the rear of the tractor. And the tractor moves fine after I engage the transmission I know that if I don't get it fixed something...

View more questions Search