 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Rain Dial-RD600
I have a Rain Dial-RD600 watering system in my yard. I have been trying to program it the way I have over the past several years and am unable to get it to function correctly.
I set the days to water, the amount of time I want to water from each valve and when I try to manually check it the LED display goes to OFF and begins blinking after I enter the amount of time. I have changed the battery, checked the power supply and don't know how to fix it. In my troubleshooting section of my manual it says it could be "Excessive Load" but it's never been a problem before or that it could be a shorted solenoid or field wiring. How do I check these things. What is the solenoid and how do it check it? |
||||
Check out some similar questions!
I'm Looking for a Hardie Irrigation Controller Manual for a 729901. Do you know where I can find one?
I was wondering if it was possible to install a rain sensor to the Hardie "RD-1200" irrigation controller, & if yes, how? There is no rain sensor terminal.
Rd-900.. it appears there is a rain gauge hooked into the rain dial but does seem to be working. I assume if we had 3inches of rain the sprinklers should not turn on the next morning. How should I go about fixing this?
I have an RD-1200 Rain Dial that has a frozen display and controls. The display shows a time of 2 AM but it can't be changed and none of the other controls or programs respond. The Rain Dial is getting AC power and I put in a new 9 V battery but that hasn't done anything. Obviously my sprinklers...
We recently bouht a house with this type of sprinkler system. The system was shut down before the winter and we are ready to get it running again. How do you get this system up and running after a winter shut down. Thanks for whatever help you can give.:)
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
