Ask Experts Questions for FREE Help !
Ask
    cecbo95's Avatar
    cecbo95 Posts: 2, Reputation: 2
    New Member
     
    #1

    May 22, 2008, 05:54 AM
    Lawn tractor engine swap
    I can get a Craftsman 2001 LT 1000 tractor with no engine and I have a 1998 (I think)Craftsman 14 1/2 hp OHV I/C Gold tractor with a bad trans. Can I put the 1998 engine into the 2001 tractor?

    Thanks
    MOWERMAN2468's Avatar
    MOWERMAN2468 Posts: 3,214, Reputation: 243
    Ultra Member
     
    #2

    May 24, 2008, 07:18 PM
    Yes, and if they are both briggs the pto pulley should work without modifications.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lawn tractor engine won't start [ 18 Answers ]

I've already swapped out the solenoid. No luck. Battery is good. I "think" I checked all the ground connections and safety switches. Problem is when the key is turned on the engine turns once... then slows to a stop... it may go over again.. but it won't go long or fast enough to start......

Noisy Crafstman lawn tractor engine [ 1 Answers ]

My Craftsman garden tractor (917.275023) just started making a tin sound, almost like a faulty muffler.although the noise is coming from the engine. It's lost a little power but works fine otherwise. Valve issue?

Craftsman Lawn tractor engine dies [ 6 Answers ]

I have a Craftsman lawn tractor (model #917-257481). The engine dies when I pull out the PTO switch to engage the mower. Have replaced PTO switch and the "clutch" switch. It still does it. I can hear the PTO engage. With the new "clutch" switch installed it also dies when you let out the clutch. I...

Lawn tractor will not engage engine [ 1 Answers ]

The plastic gear on top of what I guess is the starter on model no.917-257631(craftsman 42') is worn down and Icannot find the part or part no. anywhere


View more questions Search