How to change code on a keyless entry pad for a craftsman garage door

You need your model number and go through Sears. They have several models and each is different, mine can not be changed so hope you are lucky. Try Parts & Accessories | Shop & Find Lawn & Garden, Appliance Parts at Sears Parts Direct | SearsPartsDirect.com from Sears and look for your manual.

All keypads can be changed... I'll get the answer for you, I did it myself years ago. Check back in a day or so.

On the back or side of the opener (get up there on a ladder and take the light covers off) there should be a 1/2" x 1/2" button (color varies, probably red).

Press and release the button and a little LED light beside it will light up. Now you have 30 seconds, so skeddadle down the ladder and over to the keypad to enter a new 4 digit code---- then pres enter on the keypad.

The lights on opener should flash and the opener will make a clicking sound. On some models the door will operate, but probably not. The little LED light will go out (of course you won't be able to see it, you've gotten off the ladder) and the new code is programmed. Use a different number for the second opener.

(ps... if you don't have a ladder just open your car door and stand on the edge of the door frame, leaning on the car hood---- it works)

(pps... rate my answer please, time to build the reputation... thanks!)