 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Inducer motor
My inducer motor comes on for a few seconds then stops and repeat the cycle. I pulled the vacuum hose from the pressure switch and the inducer runs normally. While it runs I manually close the pressure switch (sucking on the hose) and the motor stops. Did this several times, same result.
|
||||
Check out some similar questions!
I took off inducer motor mounting bolts but can't pull motor out
[ 2 Answers ]
I can't pull out inducer motor for bryant plus 90 furnace. I have mounting bolts off but shaft is holding me mack. How do I get it to release?
What is a inducer motor
[ 1 Answers ]
What is a inducer motor
Inducer motor?
[ 1 Answers ]
When I turn my thermostat on at first I hear a humming then it blows hot air then cold air. I was told I need an Inducer motor? Does that sound correct?
How much for an inducer motor?
[ 1 Answers ]
How much should it cost to replace a goodman inducer motor that is humming?
What is the inducer motor
[ 3 Answers ]
I have a bryant 395C gas furnace and the inducer motor assembly is making noise. The motor seems fine and the furnace operates normally, but there is a plastic wheel attached to the end of the motor that is rattling when the motor runs. I've looked at pictures of many inducer motor...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
