Shallow well pump advice and a diagram on the piping
Add your answer here.
Check out some similar questions!
Do I need a Shallow well pump ? [ 9 Answers ]
:cool: Hi, I just bought a cabin that has a spring on the property up above the house at an entry elevation that is maybe 7-10' above the roof line. My spring flows into a shallow holding well then flows through 1" sprinkler line (Black plastic hose) The water must flow constantly because...
Shallow well pump [ 1 Answers ]
It will build pressure but as soon as it shuts off at 38lbs. It drops to 18lbs. In about 1min
Craftsman shallow well pump [ 2 Answers ]
Hi,I installed a 1/2 hp pump,to pump water out of a canal.The intake sets only 6 ft. below the pump.When I turn on the pump,it works fine, until it runs out of water. Then the pump keeps running.It has a 30 / 50 pre-set pressure switch.It has a built in check valve.No pressure tank.What do I do to...
New shallow pump-no water [ 3 Answers ]
Have 30 year old home with approx 30 year old 25' well.well not used for 3-4 years.installed new 1/2 hp pump with no tank.prime to top of plumbing,close valve and start pump.builds enough pressure to blow out primed fill but then stops pumping.how do I check for air.once empty can feel plenty of...
Installing shallow well system [ 4 Answers ]
I bought a lot with a well. The hole is there but no pump are tank. I need to know how to install the pump , pressure switch ,and tank. I will be using a diaphram tank.any help would be appreciated.
View more questions Search