 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
4 relays with 1 switch
Hey everyone I am trying to find, or make a circuit that will activate one relay every time you hit the 1 momentary switch up (or down), all the way thew 4 relays, then back down threw them every time you hit the switch down. Up-1 up-2 up-3 up-4 dwn-3 dwn-2 dwn-1 so just leaving one relay on at a time Please help!
|
||||
Check out some similar questions!
We have a unit that is central air and electric furnace combined. It was originally Intertherm, but the outside part (compressor?) has been replaced with a Rheem. The inside part is now 11 years old. I do not understand all of this, so please bear with me... I am trying to communicate it as...
WHen the temp goes below 35 outside the carrier heat pump cycles every minute. Is this caused by the thermostat or is there a relay to prevent the defrost from cycling at cold temps?
Please tell me the function of relays
Where and what relays do I need to check so I can get some spark. My ingtion fuses are all good so something is telling it not to fire.
How do I know if my relay is bad? Replaced the contactor and the unit will run but want come on after it cycles.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
