Ask Experts Questions for FREE Help !
Ask
    amwhiu's Avatar
    amwhiu Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 4, 2009, 04:18 PM
    Compaq presario 5000Z
    How do you remove the front cover from compaq presario 5000Z it only has one side that unscrews I found some plastic tabs three on the inside but still cannot remove it :(
    darkvision's Avatar
    darkvision Posts: 232, Reputation: 15
    Full Member
    		  
    #2

    Mar 5, 2009, 05:58 PM

    Generally speaking any case with a plastic front that is kept on by tabs also has tabs not only on the sides but on top and bottom. 90% of the time you have to remove at least some components to get to the other tabs or even to be able to see them. Also sometimes they will hide the tabs on top with the top cover to the PC(check for screw's or tabs to undo). Slide it off and see if you can see more tabs.
    chaosmaster1's Avatar
    chaosmaster1 Posts: 294, Reputation: 12
    Full Member
    		  
    #3

    Mar 28, 2009, 08:57 PM

    Try remopving the panel on the motherboard side and seeing if there is some screws there holding it in
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Compaq presario 770 [ 1 Answers ]

Will the compaq presario accept external speakers

Compaq Presario [ 2 Answers ]

While typing sometimes the letters will move to another location during writing,Example(faster or slower doesn't make a difference),hit space bar and the curser goes to a space 5 words back.(not just the space bar,just an example) This happens here in ASK ME,as well as in WORD. Didn't have...

Compaq presario [ 1 Answers ]

I have this presario that worked fine. I moved it and now when I turn it on only the yellow light at switch comes on and I get no signal on monitor. Before it was moved both green and yellow light came on and it booted fine. I changed switch to no avail

Compaq Presario [ 3 Answers ]

Compact Presairo computer does not want to accept NEC Multi Sync LCD1530V flatscreen . Tells me Video Input is Out of Range. H: 53.7 kHz V 95.1 Hz. The unfortunate part is that it runs Windows ME... yes I know sad isn't it... but it was given to me for free, so I can't complain. Any idea's on how...

View more questions Search